Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK COMBINATION METER INPUT
- Start the engine and select METER/M&A on CONSULT.
- Observe OIL W/L DATA MONITOR and the operation of the low oil pressure warning message in the information display.
Component Condition CONSULT Low oil pressure warning message Engine running OFF
Is the inspection result normal?
YES
Perform ECM self-diagnosis. Refer to CONSULT FUNCTION (except for Mexico) .
NO
Replace combination meter. Refer to REMOVAL AND INSTALLATION .