LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Warning Chime System (Except Hybrid) >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK COMBINATION METER INPUT SIGNAL

    Select the Data Monitor for the "METER/M&A and check the BUZZER monitor value.

    BUZZER  
    Under the condition of buzzer input : On
    Except above : Off

    Is the inspection result normal?

    YES 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace BCM. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals