DCA System Settings Cannot Be Turned On/Off In Vehicle Information Display: Description
- DCA system setting is not selectable on the navigation screen.NOTE:
When the ignition switch is in ACC position, DCA system settings cannot be changed.
- "Distance Control Assist" is not indicated on the navigation screen.
- The switching between ON and OFF cannot be performed by operating the navigation system.
- The item of "Distance Control Assist" on the navigation screen is not active.
- After turning ON the ignition switch or starting the engine, DCA settings of the navigation system cannot be selected for several tens of seconds under the following conditions:
- After replacing AV control unit.
- After erasing connection history of the navigation system.
- After erasing self-diagnosis results.
- The DCA system setting differs from the one set at the previous driving.NOTE:
Turn OFF the ignition switch and wait for 5 seconds or more.