LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (BCI) (Diagnostic Trouble Codes (DTCS), Symptom Diagnosis And R & I) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> ADAS Control Unit >> Diagnosis Procedure

Diagnosis Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn the Blind Spot Intervention system ON.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "U1010" detected as the current malfunction?

    YES 

    Replace the ADAS control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals