DTC Confirmation Procedure

1. Start the engine.
2. Turn the Blind Spot Intervention system ON.
3. Drive the vehicle at 30 km/h (19 MPH) or more.
   CAUTION:

   Always drive safely.

4. Stop the vehicle.
5. Perform "All DTC Reading" with CONSULT.
6. Check if the "C1A03" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

Is "C1A03" detected as the current malfunction?

YES-1 (Blind Spot Warning/Blind Spot Intervention warning lamp: ON) 

Refer to DIAGNOSIS PROCEDURE .

YES-2 (Blind Spot Warning/Blind Spot Intervention warning lamp: OFF) 

Refer to DTC LOGIC .

NO 

Refer to INTERMITTENT INCIDENT .