DTC Confirmation Procedure

1. Turn the ignition switch OFF.
2. Wait for 10 minutes or more and cool the accelerator pedal actuator integrated motor.
3. Drive the vehicle with DCA system ON and operate the system.
   CAUTION:

   Always drive safely.

4. Stop the vehicle.
5. Perform "All DTC Reading" with CONSULT.
6. Check if the DTC "C1F03" is detected as the current malfunction in self-diagnosis results of "ACCELE PEDAL ACT".

Is "C1F03" detected as the current malfunction?

YES 

Refer to DIAGNOSIS PROCEDURE .

NO 

Refer to INTERMITTENT INCIDENT .