DTC Confirmation Procedure

1. Start the engine.
2. Turn the Blind Spot Intervention system ON.
3. Wait for approximately 5 minutes or more after shifting the selector lever to "P" position.
4. Perform "All DTC Reading" with CONSULT.
5. Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

Is "C1A24" detected as the current malfunction?

YES 

Refer to DIAGNOSIS PROCEDURE .

NO 

GO TO STEP 2. 

1. Wait for approximately 5 minutes or more after shifting the selector lever to "N" position.
2. Perform "All DTC Reading".
3. Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

Is "C1A24" detected as the current malfunction?

YES 

Refer to DIAGNOSIS PROCEDURE .

NO 

Refer to INTERMITTENT INCIDENT .