LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Intelligent Cruise Control System (ICC) (Diagnostic Trouble Codes (DTCS), Symptom Diagnosis And R & I) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C1A05: Brake SW/Stop Lamp SW >> Component Inspection (Brake Pedal Position Switch)

Component Inspection (Brake Pedal Position Switch)

  1. CHECK BRAKE PEDAL POSITION SWITCH

    Check for continuity between brake pedal position switch terminals.

    Terminal Condition Continuity
    1 2 When brake pedal is depressed Not existed
    When brake pedal is released Existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace brake pedal position switch.

scientia non olet · About LEMON Manuals