Fail Safe

Combination meter performs fail - safe operation when unified meter and A/C amp. communication is malfunction.

Solution for communication error between the unified meter and A/C amp. and combination meter.

Function		Specifications
Speedometer		Reset to zero by suspending communication.
Tachometer
Fuel gauge
Engine coolant temperature gauge
Illumination control		When suspending communication, change to nighttime mode.
Information display	Door open warning	The display turns off by suspending communication.
	Parking brake release warning
	Low tire pressure warning
	Fuel filler cap warning
	Instantaneous fuel warning	When reception time of an abnormal signal is 2 seconds or less, the last received datum is used for calculation to indicate the result. When reception time of an abnormal signal is more than two seconds, the last result calculated during normal condition is indicated.
	Average fuel consumption
	Average vehicle speed
	Travel distance
Buzzer		The buzzer turns off by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp	The lamp turns on by suspending communication.
	VDC warning lamp
	Brake warning lamp
	CRUISE warning lamp
	Malfunction indicator lamp
	High beam indicator	The lamp turns off by suspending communication.
	Turn signal indicator lamp
	Oil pressure warning lamp
	A/T CHECK warning lamp
	VDC OFF indicator lamp
	Low tire pressure warning lamp
	Key warning lamp
	AFS OFF indicator lamp
	Master warning lamp
	Tail lamp indicator lamp
	Front fog lamp indicator lamp