Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect combination meter connector and washer level switch connector.
3. Check continuity between combination meter harness connector terminal and washer level switch harness connector terminal.

   Combination meter		Washer level switch		Continuity
   Connector	Terminal	Connector	Terminal
   M53	31	E32	1	Existed

4. Check continuity between combination meter harness connector terminal and ground.

   Combination meter		Ground	Continuity
   Connector	Terminal
   M53	31		Not existed

Is the inspection result normal?

YES 

INSPECTION END

NO 

Repair harness or connector.