Diagnostic Test

1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connector and oil pressure switch connector.
3. Check continuity between IPDM E/R harness connector terminal and oil pressure switch harness connector terminal.

   IPDM E/R		Oil pressure switch		Continuity
   Connector	Terminal	Connector	Terminal
   E7	75	F37	1	Existed

4. Check continuity between IPDM E/R harness connector terminal and ground.

   IPDM E/R		Ground	Continuity
   Connector	Terminal
   E7	75		Not existed

Is the inspection result normal?

YES 

INSPECTION END

NO 

Repair harness or connector.