LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Suspension (AWD) (Exc Hybrid)) >> Periodic Maintenance >> Wheel Alignment >> Direct Adaptive Steering >> Inspection >> Description

Direct Adaptive Steering: Inspection: Description

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Always perform DAST calibration with CONSULT when adjusting the toe-in. (It cannot be adjusted without CONSULT.)
  • Camber, caster, kingpin inclination angles cannot be adjusted.
  • If camber, caster, or kingpin inclination angle is outside the standard, check front suspension parts for wear and damage. Replace suspect parts if a malfunction is detected.
  • Kingpin inclination angle is reference value, no inspection is required.

Measure wheel alignment under unladen conditions.

NOTE:

"Unladen conditions" means that fuel, engine coolant, and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

scientia non olet · About LEMON Manuals