LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (Exc Hybrid)) >> DTC/Circuit Diagnosis >> DTC P1826: Transfer Fluid Temperature >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

  1. CHECK TRANSFER FLUID TEMPERATURE SENSOR

    1. Turn ignition switch OFF.
    2. Disconnect AWD solenoid harness connector.
    3. Check resistance between AWD solenoid connector terminals.
      AWD solenoid Condition Resistance
      (Approx.)
      Terminal
      6 7 20°C (68°F) 2.5 kΩ
      80°C (176°F) 0.3 kΩ

    Is inspection result normal?

    YES 

    INSPECTION END

    NO 

    Transfer fluid temperature sensor is malfunctioning. Replace electric controlled coupling. Refer to DISASSEMBLY  and ASSEMBLY .

scientia non olet · About LEMON Manuals