Diagnostic Test

1. Turn ignition switch OFF.
2. Disconnect sunroof motor assembly harness connector and combination meter harness connector.
3. Check continuity between sunroof motor assembly harness connector and combination meter harness connector.

   Sunroof motor assembly		Combination meter		Continuity
   Connector	Terminal	Connector	Terminal
   R10	8	M57	38	Existed

4. Check continuity between sunroof motor assembly harness connector and ground.

   Sunroof motor assembly		Ground	Continuity
   Connector	Terminal
   R10	8		Not existed

Is the inspection result normal?

YES 

Check combination meter. Refer to DTC DESCRIPTION .

NO 

Repair or replace harness.