Work Procedure

CHECK ANTI-PINCH FUNCTION
1. Full open the sunroof.
2. Place a wooden piece (wooden hammer handle, etc.) at near fully-closed position (more than 3 mm from fully-closed position).
3. Close the sunroof completely with auto-slide close.
4. Check that sunroof reverses for approximately 130 mm - 160 mm (5.12 in - 6.30 in) * without pinching a wooden piece and stops.
* : When the distance between pinching position and fully-open position is less than 150 mm, sunroof reverses to fully-open position
CAUTION:
- To prevent injury, never check with hands and other part of body because they may be pinched. Never get pinched.
Is the inspection result normal?

YES

INSPECTION END

NO

Perform initialization procedure. Refer to DESCRIPTION .