Work Procedure

1. Operate sunroof switch and set glass lid to the tilt up position.
2. Press and hold the sunroof switch to the close side.
3. Release the sunroof switch when the glass lid is tilted up slightly.
4. Within 4 seconds, press and hold the sunroof switch to the close side.
5. After 4 seconds, the glass lid is automatically operated in sequence of tilt-up → tilt-down → slide-open → slide-close. Release the switch.

GO TO STEP 2  .

1. Operate sunroof switch and check that glass lid automatically operates normally.
2. Perform anti-pinch function check. Refer to DESCRIPTION .

Is the inspection result normal?

YES 

INSPECTION END

NO 

Perform glass lid adjustment. Refer to ADJUSTMENT .