LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Exc Hybrid) >> Symptom Diagnosis >> Reminder Function Does Not Operate >> Trunk Lid Opener Request Switch >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

  1. CHECK "TRUNK/GLASS HATCH OPEN" SETTING IN "WORK SUPPORT"

    1. Select "TRUNK/GLASS HATCH OPEN" of "BCM" using CONSULT.
    2. Select "TRUNK/GLASS HATCH OPEN" in "WORK SUPPORT" mode.
    3. Check the "TRUNK/GLASS HATCH OPEN" in "WORK SUPPORT".

      Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Set "On" in "TRUNK/GLASS HATCH OPEN".

  2. CHECK INTELLIGENT KEY WARNING BUZZER

    Check Intelligent Key warning buzzer.

    Refer to COMPONENT FUNCTION CHECK .

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Repair or replace the malfunctioning parts.

  3. REPLACE BCM

    1. Replace BCM. Refer to REMOVAL AND INSTALLATION .
    2. Confirm the operation after replacement.

    Is the result normal?

    YES 

    INSPECTION END

    NO 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals