LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Exc Hybrid) >> DTC/Circuit Diagnosis >> Unlock Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "UNLK SEN-DR" in "DATA MONITOR" mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    UNLK SEN -DR Driver door Lock OFF
    Unlock ON

    Is the inspection result normal?

    YES 

    Unlock sensor is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals