LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Intelligent Cruise Control System (ICC) (Exc Hybrid) >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK FUSES

    Check if any of the following fuses are blown:

    Signal name Fuse No.
    Ignition power supply 54

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Replace the blown fuse after repairing the affected circuit if a fuse is blown.

  2. CHECK ICC SENSOR POWER SUPPLY CIRCUIT

    Check voltage between ICC sensor harness connector and ground.

    Terminal Condition Voltage
    (Approx.)
    (+) (-)
    ICC sensor Ground Ignition switch
    Connector Terminal
    E80 1 OFF 0 V
    ON Battery voltage

    Is the inspection result normal?

    YES 

    GO TO STEP 3. 

    NO 

    Repair the ICC sensor power supply circuit.

  3. CHECK ICC SENSOR GROUND CIRCUIT

    1. Turn the ignition switch OFF.
    2. Disconnect the ICC sensor connector.
    3. Check for continuity between ICC sensor harness connector and ground.
      ICC sensor Ground Continuity
      Connector Terminal
      E80 8 Existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Repair the ICC sensor ground circuit.

scientia non olet · About LEMON Manuals