Diagnosis Procedure
- CHECK REAR DOOR SPEAKER CIRCUIT FOR OPEN
- Turn ignition switch OFF.
- Disconnect BOSE amp. harness connector and rear door speaker LH or RH harness connector.
- Check the continuity between BOSE amp. harness connector and rear door speaker LH or RH harness connector.REAR DOOR SPEAKER LH
BOSE amp. Rear door speaker LH Continuity Connector Terminal Connector Terminal B53 5 D39 1 Existed 6 2 REAR DOOR SPEAKER RHBOSE amp. Rear door speaker RH Continuity Connector Terminal Connector Terminal B53 14 D48 1 Existed 9 2
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair or replace malfunctioning parts.
- CHECK REAR DOOR SPEAKER CIRCUIT FOR SHORT TO GROUND
Check the continuity between rear door speaker LH or RH harness connector and ground.
REAR DOOR SPEAKER LHTerminals Continuity (+) (-) Rear door speaker LH Connector Terminal D39 1 Ground Existed 2 REAR DOOR SPEAKER RHTerminals Continuity (+) (-) Rear door speaker RH Connector Terminal D48 1 Ground Existed 2 Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Repair or replace malfunctioning parts.
- CHECK REAR DOOR SPEAKER CIRCUIT FOR SHORT TO POWER SUPPLY
- Turn ignition switch ON.
- Check the voltage between rear door speaker LH or RH harness connector and ground.
REAR DOOR SPEAKER LHTerminals Voltage
(Approx.)(+) (-) Rear door speaker LH Connector Terminal D39 1 Ground 0 V 2 REAR DOOR SPEAKER RHTerminals Voltage
(Approx.)(+) (-) Rear door speaker RH Connector Terminal D48 1 Ground 0 V 2 Is the inspection result normal?
YES
Replace rear door speaker LH or RH. Refer to REMOVAL AND INSTALLATION .
NO
Repair or replace malfunctioning parts.