Diagnosis Procedure
- CHECK FRONT CENTER SQUAWKER CIRCUIT FOR OPEN
- Turn ignition switch OFF.
- Disconnect BOSE amp. harness connector and front center squawker harness connector.
- Check the continuity between BOSE amp. harness connector and front center squawker harness connector.
BOSE amp. Front center squawker Continuity Connector Terminal Connector Terminal B54 17 M96 1 Existed 18 2
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair or replace malfunctioning parts.
- CHECK FRONT CENTER SQUAWKER CIRCUIT FOR SHORT TO GROUND
Check the continuity between front center squawker harness connector and ground.
Terminals Continuity (+) (-) Front center squawker Connector Terminal M96 1 Ground Existed 2 Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Repair or replace malfunctioning parts.
- CHECK FRONT CENTER SQUAWKER CIRCUIT FOR SHORT TO POWER SUPPLY
- Turn ignition switch ON.
- Check the voltage between front center squawker harness connector and ground.
Terminals Voltage
(Approx.)(+) (-) Front center squawker Connector Terminal M96 1 Ground 0 V 2 Is the inspection result normal?
YES
Replace front center squawker. Refer to REMOVAL AND INSTALLATION .
NO
Repair or replace malfunctioning parts.