Diagnosis Procedure

CHECK FRONT SQUAWKER CIRCUIT FOR OPEN

Turn ignition switch OFF.
Disconnect BOSE amp. harness connector and front squawker LH or RH harness connector.

Check the continuity between BOSE amp. harness connector and front squawker LH or RH harness connector.

FRONT SQUAWKER LH

BOSE amp.		Front squawker LH		Continuity
Connector	Terminal	Connector	Terminal	Continuity
B54	16	M115	1	Existed
B54	29	M115	2	Existed

FRONT SQUAWKER RH

BOSE amp.		Front squawker RH		Continuity
Connector	Terminal	Connector	Terminal	Continuity
B54	31	M112	1	Existed
B54	30	M112	2	Existed

Is the inspection result normal?

YES

GO TO STEP 2 .

NO

Repair or replace malfunctioning parts.

CHECK FRONT SQUAWKER CIRCUIT FOR SHORT TO GROUND

Check the continuity between front squawker LH or RH harness connector and ground.

FRONT SQUAWKER LH

Terminals			Continuity
(+)		(-)
Front squawker LH
Connector	Terminal
M115	1	Ground	Existed
M115	2	Ground	Existed

FRONT SQUAWKER RH

Terminals			Continuity
(+)		(-)
Front squawker RH
Connector	Terminal
M112	1	Ground	Existed
M112	2	Ground	Existed

Is the inspection result normal?

YES

GO TO STEP 3 .

NO

Repair or replace malfunctioning parts.

CHECK FRONT SQUAWKER CIRCUIT FOR SHORT TO POWER SUPPLY

Turn ignition switch ON.
Check the voltage between front squawker LH or RH harness connector and ground.

FRONT SQUAWKER LH

Terminals			Voltage (Approx.)
(+)		(-)
Front squawker LH
Connector	Terminal
M115	1	Ground	0 V
M115	2	Ground	0 V

FRONT SQUAWKER RH

Terminals			Voltage (Approx.)
(+)		(-)
Front squawker RH
Connector	Terminal
M112	1	Ground	0 V
M112	2	Ground	0 V

Is the inspection result normal?

YES

Replace front squawker LH or RH. Refer to REMOVAL AND INSTALLATION .

NO

Repair or replace malfunctioning parts.