LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (Diagnostic Trouble Codes (DTCS) Symptom Tests & Component R&R) (Exc Hybrid) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> Accelerator Pedal Actuator >> Diagnosis Procedure

Diagnosis Procedure

  1. PERFORM THE SELF-DIAGNOSIS

    1. Turn the ignition switch ON.
    2. Turn the DCA system ON, and then wait for 2 seconds or more.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "ACCELE PEDAL ACT".

    Is "U1000" detected as the current malfunction?

    YES 

    Refer to TROUBLE DIAGNOSIS FLOW CHART .

    NO - 1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO - 2 

    Confirmation after repair: INSPECTION END