Diagnosis Procedure

If DTC "C1F07" is displayed with DTC "U1000", first diagnose the DTC "U1000".

Is applicable DTC detected?

YES 

Perform diagnosis of applicable. Refer to DTC LOGIC .

NO 

GO TO STEP 2  .

1. Turn the ignition switch OFF.
2. Replace the ADAS control unit. Refer to REMOVAL AND INSTALLATION .
3. Erases all self-diagnosis results.
4. Perform "All DTC Reading" again.
5. Check if the "C1F07" is detected in self-diagnosis results of "ACCELE PEDAL ACT".

Is "C1F07" detected?

YES 

Replace the accelerator pedal assembly. Refer to EXPLODED VIEW .

NO 

INSPECTION END