Diagnosis Procedure

CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Check the terminals and connectors of the side radar RH for damage, bend and short (unit side and connector side).
Is the inspection result normal?

YES

GO TO STEP 2 .

NO

Repair the terminal or connector.

CHECK CONTINUITY RIGHT/LEFT SWITCHING SIGNAL CIRCUIT

Disconnect side radar RH connector.
Check continuity between side radar RH harness connectors and ground.

Side radar RH		Ground	Continuity
Connector	Terminal
B93	6		Existed

Is the inspection result normal?

YES

INSPECTION END

NO

Repair harness or connector.