Blind Spot Warning/Blind Spot Intervention: Description

Always perform the Blind Spot Warning and Blind Spot Intervention system action test to check that the system operates normally after replacing the lane camera unit, replacing the side radar left (right), or repairing any Blind Spot Intervention system malfunction.

NOTE:

Perform the Blind Spot Intervention system action test after checking that the LDP system operates normally because the Blind Spot Intervention system shares components with the LDP system.

WARNING:

Be careful of traffic conditions and safety around the vehicle when performing road test.

CAUTION:

Fully understand the following items well before the road test;

Precautions: Refer to BLIND SPOT WARNING/BLIND SPOT INTERVENTION SYSTEM SERVICE .
System description for Blind Spot Warning: Refer to SYSTEM DESCRIPTION .
System description for Blind Spot Intervention: Refer to SYSTEM DESCRIPTION .
Normal operating condition: Refer to DESCRIPTION .