Diagnosis Procedure
- CHECK TURN SIGNAL OPERATION
Check that both right and left turn signals are normal.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair or replace malfunctioning parts. Refer to SYMPTOM TABLE .
- CHECK SELF-DIAGNOSIS RESULTS
- Perform "All DTC Reading" with CONSULT.
- Check if the DTC is detected in self-diagnosis results of "ICC/ADAS" Refer to DTC INDEX .
Is any DTC detected?
YES
Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts.
NO
Replace ADAS control unit. Refer to REMOVAL AND INSTALLATION .