Diagnostic Test

Check trunk lid opener cancel switch is setting in ON position.

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Set trunk lid opener cancel switch to ON position.

Check trunk lid opener cancel switch.

Refer to COMPONENT FUNCTION CHECK .

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Repair or replace the malfunctioning parts.

Check trunk lid opener actuator.

Refer to COMPONENT FUNCTION CHECK .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Repair or replace the malfunctioning parts.

1. Replace BCM. Refer to REMOVAL AND INSTALLATION .
2. Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .