LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (Exc Hybrid) >> Symptom Diagnosis >> Auto Door Lock Operation Does Not Operate >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

  1. CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
    3. Check "AUTO LOCK SET" in "WORK SUPPORT".

      Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Set "MODE 2", "MODE 3", "MODE 4", "MODE 5", "MODE 6" or "MODE 7" in "AUTO LOCK SET".

  2. REPLACE BCM

    1. Replace BCM. Refer to REMOVAL AND INSTALLATION .
    2. Confirm the operation after replacement.

    Is the result normal?

    YES 

    INSPECTION END

    NO 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals