Component Inspection

1. Remove steering switch. Refer to REMOVAL AND INSTALLATION .
2. Measure the resistance between the steering switch connector.

   Steering switch		Condition	Resistance (Approx.) Ω
   Terminal	Terminal
   14	17	BACK switch ON	1
   		MENU UP switch ON	119 - 123
   		MENU DOWN switch ON	315 - 327
   		Voice recognition switch ON	709 - 737
   		MENU OK switch ON	1983 - 2063
   15		VOL DOWN switch ON	1
   		VOL UP switch ON	119 - 123
   		TEL switch ON	315 - 327
   		Display next switch ON	709 - 737
   		Display back switch ON	1983 - 2063

   Fig 1: Checking Resistance Between Steering Switch Connector Terminals

   Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

INSPECTION END

NO 

Replace steering switch. Refer to REMOVAL AND INSTALLATION .