Meter Illumination On/Off Control Function
- Combination meter turns ON meter illumination when the following condition is satisfied:
- Ignition switch ON
- Combination meter turns OFF meter illumination when any of the following condition is satisfied:
- During a crank with vehicle speed less than 1 km/h (0.6 MPH)
- Ignition switch OFF or ACC
- The combination meter receives the following signals to control meter illumination.
| Signal name | Signal path |
|---|---|
| Ignition signal | - |
| Engine status signal | ECM → via CAN Communication line→ Combination meter |
| Vehicle speed signal | ABS actuator and control unit (control unit) → via CAN Communication line→ Combination meter |
| Starter relay status signal | BCM → via CAN Communication line→ Combination meter |