DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.
GO TO STEP 2 .
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine and wait for at least 5 seconds.
- Check the DTC.
Is "U0073" detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
INSPECTION END