LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transmission (Re0F10J) (DTC/Circuit Diagnosis) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> Shift Position Indicator Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK TCM INPUT/OUTPUT SIGNAL

    G-20With CONSULT 

    1. Start the engine.
    2. Select "Data Monitor" in "TRANSMISSION".
    3. Select "RANGE".
    4. Shift selector lever.
    5. Check that selector lever position, "RANGE" on CONSULT screen, and shift position indicator display on combination meter are identical.

    Is the check result normal?

    YES 

    INSPECTION END

    NO-1 ("RANGE" is changed but is not displayed on shift position indicator. 

    Check "Self Diagnostic Result" in "TRANSMISSION".

    NO-2 ("RANGE" and shift position indicator are different.) 

    Check "Self Diagnostic Result" in "TRANSMISSION".

    NO-3 (Specific "RANGE" is not displayed on shift position indicator.) 

    Check "Self Diagnostic Result" in "METER/M&A".

scientia non olet · About LEMON Manuals