LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transmission (Re0F10J) (DTC/Circuit Diagnosis) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> Shift Lock System >> Component Inspection (Shift Lock Solenoid)

Component Inspection (Shift Lock Solenoid)

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK SHIFT LOCK SOLENOID

    Apply voltage to terminals of shift lock solenoid and park position switch (shift selector) connector and check that shift lock solenoid is activated.

    CAUTION:
    • Connect the fuse between the terminals when applying the voltage.
    • Never cause shorting between terminals.
    + (fuse) - Condition Status
    Shift lock solenoid
    Terminal
    3 4 Apply 12 V between terminals 3 and 4 with the park position switch (shift selector) in the "P" (park) position. Shift lock solenoid operates

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace CVT shift selector. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals