LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transmission (Re0F10J) (DTC/Circuit Diagnosis) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> DTC P0963: Pressure Control Solenoid A >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
DTC CONSULT screen terms
(Trouble diagnosis content)		 DTC detection condition Possible causes
P0963 PC SOLENOID A
(Pressure Control Solenoid A Control Circuit High)		 When all of the following conditions are satisfied and this state is maintained for 0.2 seconds:
  • TCM power supply voltage: More than 11 V
  • P0962 is not detected
  • TCM judges that solenoid valve circuit is open.
  • Harness or connector

    (Line pressure solenoid valve circuit is open or shorted to power supply)

  • Line pressure solenoid valve
scientia non olet · About LEMON Manuals