LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Automatic Transmission (Re0F10E) (DTC/Circuit Diagnosis) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> DTC P2814: Select Solenoid >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
DTC CONSULT screen terms
(Trouble diagnosis content)		 DTC detection condition Possible causes
P2814 SELECT SOLENOID
(Select solenoid)		 When all of the following conditions are satisfied and this state is maintained for 0.48 seconds:
  • TCM power supply voltage: 11 V or more
  • TCM judges that solenoid valve circuit is shorted to ground.
  • Harness or connector

    (Select solenoid valve circuit shorted to ground)

  • Select solenoid valve
scientia non olet · About LEMON Manuals