LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Automatic Transmission (Re0F10E) (DTC/Circuit Diagnosis) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> DTC P0967: Pressure Control Solenoid B >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
DTC CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition Possible causes
P0967 PC SOLENOID B
(Pressure Control Solenoid B Control Circuit High)
When all of the following conditions are satisfied and this state is maintained for 0.2 seconds:
  • TCM power supply voltage: More than 11 V
  • P0966 is not detected
  • TCM judges that solenoid valve circuit is open.
  • Harness or connector

    (Primary pressure solenoid valve circuit open or shorted to power supply)

  • Primary pressure solenoid valve