LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Automatic Transmission (Re0F10J) (Symptom Diagnosis & Removal And Installation) (Except Hybrid)) >> Unit Disassembly And Assembly >> Torque Converter And Converter Housing Oil Seal >> Disassembly

Torque Converter And Converter Housing Oil Seal: Disassembly

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transaxle assembly. Refer to REMOVAL AND INSTALLATION .
  2. Remove torque converter from transaxle assembly.
    CAUTION:

    Do not damage the bushing on the inside of torque converter sleeve when removing torque converter.

  3. Remove converter housing oil seal using suitable tool.
    CAUTION:

    Be careful not to scratch converter housing.

scientia non olet · About LEMON Manuals