LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Audio, Visual & Navigation System (Symptom Diagnosis & Removal And Installation) (BOSE Audio W/NAVI W/O Surround) (Except Hybrid)) >> Symptom Diagnosis >> Normal Operating Condition >> Description >> Related To Hands-Free Phone

Related To Hands-Free Phone

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Symptom Cause and Counter measure
Does not recognize cellular phone connection (No connection is displayed on the display at the guide). Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module.
Refer to "RELATED TO HANDS-FREE PHONE (Check Compatibility)" in SYMPTOM TABLE .
Cannot use hands-free phone. Customer will not be able to use a hands-free phone under the following conditions:
  • The vehicle is outside of the telephone service area.
  • The vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area.
  • The cellular phone is locked to prevent it from being dialed.
NOTE:

While a cellular phone is connected through the Bluetooth® wireless connection, the battery power of the cellular phone may discharge quicker than usual. The Bluetooth® Hands-Free Phone System cannot charge cellular phones.

The other party's voice cannot be heard by hands-free phone. When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person's voice during a call.
Poor sound quality. Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption.