LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Supply, Ground & Circuit Elements (Except Hybrid) >> Removal And Installation >> Battery Tray >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove battery and battery tray liner. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove air cleaner assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect harness connector and then remove ECM.
  4. Disconnect the harness connector from the transmission control module (TCM). Refer to "EXPLODED VIEW ".
  5. Remove the ECM bracket.
  6. Remove the battery tray bolts and battery tray.
  7. Remove the battery tray support bolts and battery tray support.
scientia non olet · About LEMON Manuals