LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Touch Sensor >> RH >> RH: Component Function Check

RH: Component Function Check

  1. CHECK FUNCTION 
    1. Select AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT.
    2. Select TOUCH SEN RH in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
      Monitor item Condition Status
      TOUCH SEN RH Touch sensor RH Other than below OFF
      Detect obstruction ON

      Is the inspection result normal? 

      YES: Touch sensor RH is OK.

      NO: Refer to "RH: DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals