LH: Component Inspection

CHECK TOUCH SENSOR LH

Turn ignition switch OFF.
Disconnect touch sensor LH connector.

Check resistance between touch sensor LH terminals.

Touch sensor LH		Condition		Resistance (Approx.)
Terminal		Condition		Resistance (Approx.)
1	2	Touch sensor LH	Detect obstruction	380 - 420 kΩ
1	2	Touch sensor LH	Other than above	0.95 - 1.05 kΩ

Is the inspection result normal?

YES: Inspection End.

NO: Replace touch sensor LH. Refer to "TOUCH SENSOR: REMOVAL AND INSTALLATION ".