LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK COMBINATION METER INPUT SIGNAL 

    Select the Data Monitor for the "METER/M&A and check the BUZZER monitor value.

    BUZZER

    Under the condition of buzzer input: On

    Except above: Off

    Is the inspection result normal? 

    YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

    NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals