LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Intelligent Key Warning Buzzer >> Component Inspection

Component Inspection

  1. CHECK INTELLIGENT KEY WARNING BUZZER 
    1. Turn ignition switch OFF.
    2. Disconnect Intelligent Key warning buzzer connector.
    3. Connect battery power supply directly to Intelligent Key warning buzzer terminals and check the operation.
      Intelligent Key warning buzzer Operation
      Terminal
      (+) (-)
      1 3 Buzzer sounds

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace Intelligent Key warning buzzer. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals