LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Back Door Request Switch >> Component Inspection

Component Inspection

  1. CHECK BACK DOOR REQUEST SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect back door opener switch assembly connector.
    3. Check continuity between back door opener switch assembly terminals.
      Back door opener switch assembly Condition Continuity
      Terminal
      3 4 Back door request switch Pressed Yes
      Released No

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace back door opener switch assembly. Refer to "BACK DOOR: REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals