LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Back Door Opener Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select TRUNK of BCM using CONSULT.
    2. Select TR/BD OPEN SW in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
      Monitor item Condition Status
      TR/BD OPEN SW Back door opener switch Pressed ON
      Released OFF

      Is the inspection result normal? 

      YES: Back door opener switch is OK.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals