LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Automatic Back Door Close Switch >> Component Inspection

Component Inspection

  1. CHECK AUTOMATIC BACK DOOR CLOSE SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect automatic back door close switch connector.
    3. Check continuity between automatic back door close switch terminals.
      Automatic back door close switch Condition Continuity
      Terminal
      1 2 Automatic back door close switch Pressed Yes
      Released No

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace automatic back door close switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals