LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> Side Radar LH >> SIDE RADAR LH: Diagnosis Procedure

SIDE RADAR LH: Diagnosis Procedure

  1. PERFORM THE SELF-DIAGNOSIS 
    1. Start the engine.
    2. Turn the Blind Spot Intervention system ON, and then wait for 30 seconds or more.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR LEFT".

    Is "U1000" detected as the current malfunction? 

    YES: Refer to "TROUBLE DIAGNOSIS FLOW CHART ".

    NO: Refer to "INTERMITTENT INCIDENT ".