SIDE RADAR LH: Diagnosis Procedure

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

1. CHECK POWER SUPPLY CIRCUIT 
   1. Turn ignition switch OFF.
   2. Disconnect the side radar LH connector.
   3. Check voltage between side radar LH harness connector and ground.

      Terminals			Condition	Voltage (Approx.)
      (+)		(-)
      Side radar LH		Ground	Ignition switch
      Connector	Terminal
      B416	5		OFF	0 V
      			ON	Battery voltage

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair the side radar LH power supply circuit.

2. CHECK GROUND CIRCUIT 

   Check continuity between side radar LH harness connectors and ground.

   Side radar LH		Ground	Continuity
   Connector	Terminal
   B416	2		Yes

   Is the inspection result normal? 

   YES: Inspection End.

   NO: Repair the side radar LH ground circuit.