LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (BCI) (Except Hybrid) >> Removal And Installation >> Rear Camera >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove back door outer upper finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove rear camera screws (A), then remove rear camera (1) from the back door outer upper finisher (2).
    Fig 1: Identifying Back Door Outer Upper Finisher, Rear Camera And Mounting Screws
    G08853771Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals